In this section

How to Get Connected: Android

WPA2 Configuration

The following procedures describe how to configure WPA2 for mobile devices. At this time ITS is not providing certificate support for mobile devices, though this may change in the future. We suggest that you update to the latest version of your device's software to minimize certificate issues.

Android (Droid, EVO, Aero, Eris, Passion, etc…)

These instructions are for connecting to SecureMustangWireless using an Android V4.2.1 and higher.

For newer versions of Android, WPA2-Enterprise is supported. To setup connection with the SecureMustangWireless network, make sure your device is updated to the most current version of Android.

  1. From the Settings menu, turn on Wi-Fi if it is not already on.

  2. Select Wi-Fi.
  3. Select SecureMustangWireless

  4. A window will pop up prompting for more information.

    enter information

  5. Select EAP type: PEAP.
  6. Select Phase 2 Authentication: MSCHAPv2.

    phase 2 authentication

  7. It may ask for a "credential storage" password. This is NOT the LDAP/portal password -- it's an Android password. If you haven't set it up already, you may be prompted to do so at this point.
  8. Select the thawte Primary Root CA as the the CA Certificate.


  9. For the Identity field, enter the Cal Poly Portal username.
  10. Finally, for the Wireless field, enter the Cal Poly Portal password.

    entered information

  11. Select Connect and you should now be on the SecureMustangWireless network.


Related Content